
There is a common assumption that a machine bought with a mark on it arrives safe to use. It is understandable, because the mark represents a considerable amount of work by the manufacturer. But it answers a different question from the one an end user has to answer. PUWER is the end user's legislation, and a CE or UKCA mark does not remove the duties that come with it.
PUWER is not a tick box
A PUWER assessment is sometimes treated as paperwork to be produced for an audit. That reading misses the point. The requirement is that work equipment is suitable for its intended use, safe for use, maintained in a safe condition and inspected where necessary, and used only by people with adequate information, instruction and training.
Those are questions about a specific machine in a specific place, used by specific people. A manufacturer cannot answer them on your behalf, because the manufacturer does not know your building, your product, your shifts or your maintenance team.
The assessment is about your actual operating conditions
The useful question is not whether the machine is compliant in the abstract, but whether it can be operated, adjusted, cleaned, maintained and repaired safely in the way your site actually runs it. That means looking at:
- how the machine is loaded, unloaded and cleared when it jams, and how often that happens
- whether access for cleaning and adjustment is realistic, or whether it invites people to defeat a guard
- whether maintenance and repair can be done with the machine isolated, and whether the isolation points are accessible
- who works on it, what information they have, and whether they have been trained for the task in front of them
- what the machine is exposed to: dust, washdown, heat, vibration, corrosive cleaning chemicals
The gap between the design intent and the working reality is usually where the risk sits. A guard that is correct on the drawing but awkward to remove becomes a guard that stays off.
Degradation and change over time
Equipment does not stay as installed. Interlocks go out of alignment, light curtains lose their alignment or become dirty and are bypassed, safety relays fail, guarding is cut away to make room for a new product line, and machines speed up. A one-off assessment at installation is a snapshot. The condition and the environment it is used in have to be revisited, because both change.
Modern automation needs real judgement
On older machinery, safeguarding is often visible: a physical guard, a gate, an interlock. On automated cells the protective function is increasingly performed by control system software, with safety PLCs, light curtains, laser scanners, robot safety zones and speed and separation monitoring. Whether those arrangements are adequate depends on safety functions being correctly specified, correctly implemented and correctly validated. That is a functional safety judgement, and it needs a competent person with the right experience rather than a visual inspection.
Where a safety function relies on measured stopping performance, the numbers matter. Positioning a light curtain at a distance that assumes the wrong stop time, or the wrong approach speed, leaves a machine that looks protected but is not protected to the required distance.
Record the diligence
An assessment that is not written down is difficult to demonstrate. Recording the findings, the risk rating, the corrective actions and the dates they were closed out gives you a defensible record of due diligence, and it gives you a way to show that risks were identified and addressed rather than ignored.
Where the work is done internally, it is still worth having the findings reviewed independently from time to time. The people closest to a machine are often the least likely to notice that a long-standing practice has become normalised.
Where Safemach can help
Our engineers carry out PUWER assessments on individual machines and across sites, and can follow the findings through into risk reduction, guarding and safety system work rather than leaving you with a report. If your equipment has been in service for some years or has been modified, a fresh assessment is a sensible starting point. This is general guidance rather than legal advice; the exact duties depend on your equipment and how it is used.
