UKCA or CE Marking for Machinery: What Importers Need to Know

The changing rules around UKCA marking have left machinery importers unsure whether a machine needs a UKCA mark, a CE mark or both. As of November 2026, for machinery placed on the market in Great Britain (GB: England, Scotland and Wales), either CE or UKCA marking is accepted, and recognition of CE marking under The Product Safety and Metrology etc. (Amendment) Regulations 2024 is not time-limited. For the European Union (EU) market, CE marking is required. The right route depends on where the machine will be supplied and whether it meets the relevant requirements, not simply which mark is easiest to obtain.
What do the CE and UKCA marks mean?
The CE mark indicates that the manufacturer declares the machinery meets the applicable requirements of the relevant EU legislation. The UKCA (UK Conformity Assessed) mark is the equivalent conformity mark for the GB framework.
For machinery, the governing GB legislation remains the Supply of Machinery (Safety) Regulations 2008. The EU framework is currently the Machinery Directive 2006/42/EC. From 20 January 2027, the EU Machinery Regulation (EU) 2023/1230 applies in the EU and Northern Ireland.
A mark is not the compliance work itself. It is the visible result of a process that should include risk assessment, design and safeguarding measures, conformity assessment, technical documentation and the correct declaration.

Which mark does the machine need for each market?
| Where the machine will be placed on the market | Marking position as of November 2026 |
|---|---|
| Great Britain only | CE or UKCA can be used, provided the machine follows the relevant conformity route and requirements. |
| EU only | CE marking is required under the applicable EU rules. UKCA alone is not sufficient. |
| Great Britain and EU | CE marking can support supply to both markets if the machine meets the applicable requirements and the correct conformity route has been followed for each. |
A CE-marked machine built for the EU is not automatically compliant just because it has a CE mark. Check that the declaration, technical evidence and conformity assessment relate to the actual machine and its destination. Likewise, a UKCA-marked machine cannot be assumed to meet EU requirements.
It may be possible to apply both marks, but dual marking is not a shortcut: the manufacturer must meet the requirements for each market and follow the relevant conformity assessment route. For machinery that needs third-party assessment, check that the assessment body and procedure are valid for the intended market. In particular, a UK Approved Body’s assessment supports UKCA marking only and does not, by itself, establish conformity for the EU market, and equally an EU Notified Body’s assessment does not, by itself, establish conformity for the GB market. Under Fast-Track UKCA, in place since 1 October 2024, machinery that has been conformity assessed by an EU Notified Body against the relevant EU requirements can be UKCA marked for Great Britain. That route is optional, because CE marking is recognised.
In Northern Ireland, EU rules apply under the Windsor Framework. The EU Machinery Regulation applies there from 20 January 2027.
What documentation should an importer check?
Before accepting machinery, request the documents that show how the manufacturer reached its conformity decision. Depending on the machine and market, these will normally include:
- The technical file or technical documentation, including design information and evidence supporting conformity.
- The machinery risk assessment, showing relevant hazards were identified and addressed.
- The correct declaration of conformity: the EU or UK declaration for completed machinery, as appropriate.
- Instructions for use in the language required for the market and understandable to the intended users.
- Evidence of the conformity assessment route, including certificates or details of an assessment body where third-party assessment is required.
- For partly completed machinery: a declaration of incorporation and assembly instructions, rather than the usual declaration of conformity for completed machinery.
The manufacturer is responsible for compiling the technical file. An importer should not assume that a full copy must always be supplied with the machine, but should verify that the documentation exists, is complete enough to support the claim, and can be made available to the relevant authorities. Keep your own records of the checks, declarations, supplier correspondence and corrective actions.
Check the legal name and address shown for the manufacturer and importer, and confirm that the identification and contact details meet the rules for the chosen route. A GB importer must put its name, registered trade name or mark and a postal address on the product. For machinery imported from the EEA or Switzerland, those details may go on the packaging or in an accompanying document until 31 December 2027; after that they must be on the product itself.
An importer must also check that the manufacturer has carried out the conformity assessment, drawn up the technical documentation and affixed the correct marking. It must retain the technical documentation. It must take on the manufacturer’s obligations where it places the machinery on the market under its own name or modifies it in a way that affects conformity. That last point is the one most importers get wrong. For machinery placed on the EU or Northern Ireland market under the EU rules, importer identification obligations must also be considered.
What is the importer responsible for?
Importing a machine does not make a questionable conformity claim safe to rely on. Before placing machinery on the market, an importer should establish that the manufacturer has taken the required steps and that the machine is not obviously non-compliant.
In practice, this means:
- Confirm the destination market and applicable legislation. Do not use “UK” as a catch-all: GB and Northern Ireland have different arrangements.
- Check the machine’s identity and scope. The model, type, serial number and intended use should match across the machine, declaration and technical records.
- Review the conformity assessment and marking. Make sure the mark matches the legal route and that any required third-party assessment has actually been completed.
- Check instructions and importer details. These should be present in the form and language required for the destination market.
- Retain compliance evidence and address concerns before supply. If you cannot verify the claim, do not treat the mark alone as proof of conformity.
Importer duties vary according to the market and the role your business plays in placing the machinery. Under the GB regulations, the person responsible for placing machinery on the market must ensure it is safe and that applicable requirements are met. From 20 January 2027, the EU Machinery Regulation’s importer obligations apply in Northern Ireland. If the manufacturer cannot provide credible evidence, resolve the gap before shipment or placing the machine on the market.
Where do importers get caught out?
A common misconception is that a CE or UKCA mark is a certificate showing that an independent body has inspected the machine. Many machines can be self-declared, but that does not remove the need to meet all applicable requirements and keep supporting evidence. Some machinery categories require a specific third-party conformity assessment route.
On supplier documentation, watch for:
- A declaration that names the wrong model, manufacturer or legal framework.
- Standards listed that do not match the machine or the assessment actually performed.
- Instructions supplied only in a language unsuitable for the destination market.
- A declaration of incorporation presented as if it were a declaration of conformity for a complete machine.
- A claimed third-party assessment with no valid certificate, or a body that does not cover the required route.
A declaration naming a standard is not proof that the machine complies with it. Standards and test records should support the design and risk assessment, rather than appearing as a list added at the end.
How can you check a machine before shipment?
Resolve documentation and safety questions while the supplier can still make changes. At a Factory Acceptance Test (FAT), review the machine itself alongside its technical documentation, risk assessment, declaration, instructions and conformity marking. Where issues are found, agree who will correct them and confirm the evidence before dispatch.

A CE/UKCA audit at FAT can help identify gaps before the machinery is shipped. For broader support with risk assessments, technical files, conformity assessment and declarations, see Safemach’s CE and UKCA marking service.
What changes on 20 January 2027?
The Supply of Machinery (Safety) (Amendment etc.) and the EU Machinery Regulation (Enforcement etc. in Northern Ireland) Regulations 2026 (SI 2026/867), made on 22 July 2026, come into force on 20 January 2027. From that date the instrument amends the Supply of Machinery (Safety) Regulations 2008 as they apply in Great Britain, so that machinery meeting Regulation (EU) 2023/1230 can be placed on the GB market, and it revokes the 2008 Regulations in Northern Ireland only, where the EU Machinery Regulation applies under the Windsor Framework. The GB framework therefore remains distinct from the EU framework, and this change does not mean that UKCA is being scrapped or CE is being withdrawn.
Importers supplying more than one market should check that their documentation, conformity assessment and product information match each destination’s requirements. For a fuller overview of the EU change, read our article on the Machinery Directive and Machinery Regulation.
The practical next step is to verify the machine’s destination, conformity route, marking and documentation before shipment, not to rely on the symbol alone. Safemach supports machinery manufacturers and importers with CE and UKCA marking, FAT audits, technical files, risk assessments and declarations. Speak to Safemach to discuss a machine or planned import.
