LOLER Inspection: What Gets Examined and How Often

The Lifting Operations and Lifting Equipment Regulations 1998 (LOLER) build on the Provision and Use of Work Equipment Regulations 1998 (PUWER). A LOLER thorough examination is a specific legal examination of lifting equipment: it is not a maintenance check, a pre-use check or a quick visual walk-round.
The key questions for a duty holder are practical ones: which equipment needs examining, who is competent to do it, what happens during an examination and what must be done if a defect is found. This guide focuses on those points, rather than repeating a general introduction to LOLER and its Approved Code of Practice.
Key points to know
- Lifting accessories and equipment used to lift people must usually be thoroughly examined at least every six months. Other lifting equipment must usually be examined at least every 12 months.
- A competent person may set different intervals through a written scheme of examination where appropriate.
- The examination should result in a written report identifying the equipment, examination date, safe working load, defects and next examination date.
- If a defect is or could become dangerous, the duty holder must ensure the equipment is not used until the required action has been taken.
What equipment is covered by a LOLER inspection?
LOLER applies to lifting equipment and accessories used at work. The equipment register should include items that are easy to overlook, not just large, fixed machinery. Depending on how they are used, examples include:
- Slings, including wire rope and chain slings
- Shackles, eyebolts, plate clamps and other lifting accessories
- Lifting beams and spreaders
- Trolleys, crabs, chain blocks, hoists and snatch blocks
- Magnetic lifting devices
- Vehicle lifts and other equipment used to lift people or loads

Forklifts and other machines used for lifting are also subject to LOLER in relation to their lifting operation. PUWER applies to their wider work-equipment risks, including suitability, maintenance, controls and safe use. The regimes work together; one does not replace the other. Safemach can carry out PUWER inspections alongside LOLER examinations where machinery is used for lifting.
How often is a LOLER thorough examination required?
Under Regulation 9 of LOLER 1998, unless a competent person has drawn up a written scheme of examination specifying other intervals, the minimum intervals are:
- At least every six months for lifting equipment used to lift people and for all lifting accessories.
- At least every 12 months for other lifting equipment.
These are maximum periods between examinations under the standard schedule, not a reason to wait if equipment may have become unsafe. A competent person can specify shorter intervals where the equipment, use or environment calls for them. Heat, chemicals, outdoor exposure, heavy use and other arduous conditions may accelerate deterioration.
A written scheme of examination can set out a different examination regime where appropriate. It should be prepared by a competent person, reflect the risks and condition of the equipment, and be made available to the person carrying out the examination. A scheme is not simply a way to extend intervals without justification.
An examination may also be required before equipment is first used, after installation or assembly where safety depends on those conditions, and after exceptional circumstances that could jeopardise safety, for example, damage, a major repair or a period out of use. The competent person should advise whether the circumstances require an examination.
Who is a LOLER competent person?
LOLER does not define “competent person” as a particular job title or qualification. The Approved Code of Practice and guidance, L113, describes someone with enough appropriate practical and theoretical knowledge and experience of the equipment to identify defects or weaknesses and judge their significance for safety.
Being trained to use or maintain lifting equipment does not, on its own, make someone competent to carry out a thorough examination. The role requires the expertise to assess the equipment objectively and decide whether it is safe to continue in use.
Independence matters. The competent person should be sufficiently impartial to make decisions without pressure. They should not normally be the person who uses or maintains the equipment. In-house examination can be appropriate if the person has the necessary competence, authority and independence; routine maintenance should not undermine the objectivity of the examination.
What happens during the examination?
A thorough examination is a systematic assessment of the equipment and its condition. The exact checks depend on the type of equipment, its history, use and any written scheme. The examiner may need access to relevant records and equipment details, as well as the equipment itself.
Checks can include:
- Identification and markings: confirming the item can be matched to its register and checking that safe working load (SWL) information is present and legible.
- Condition of components: looking for wear, deformation, cracks, corrosion, damage or other deterioration.
- Chains, ropes and terminations: checking for damage, wear, distortion and deterioration at connections or end fittings.
- Hooks and shackles: looking for wear, damage and signs that a hook or shackle has opened out or deformed.
- Function and safe operation: checking relevant functions and features, where applicable, and considering whether the equipment remains safe to use.
- Defects and previous findings: reviewing relevant examination history and checking whether previously reported actions have been completed.

A thorough examination is not necessarily a load test. The competent person decides what examination or testing is appropriate; any tests carried out should be recorded in the report.
What should the report contain?
Following a thorough examination, the competent person must provide a written report in accordance with Regulation 10 and Schedule 1 of LOLER. It should identify the employer and relevant premises, and give enough detail to identify the equipment. It should also state:
- The date of the examination and, where relevant, the date of the last thorough examination
- The safe working load, including the configuration examined where applicable
- Whether the equipment is safe to operate
- Any defect that is or could become a danger to people, the action required and, where relevant, how soon the defect could become dangerous
- The latest date by which the next thorough examination should take place
- The examiner’s details and any relevant tests carried out
Where a defect is or could become dangerous, the examiner must notify the employer promptly and include it in the report. If there is an existing or imminent risk of serious personal injury, the examiner must also send a copy to the relevant enforcing authority, as required by the regulations.
The duty holder must make sure equipment with a dangerous defect is not used until the required action has been taken. That means assigning responsibility, arranging repair or removal from service, and confirming the defect has been closed out, not simply filing the report.
A report is not the same thing as a “LOLER certificate”. The legal requirement is a report of thorough examination containing the prescribed information. A tag or colour-coded label may help identify status, but it does not replace the report or prove that defects have been addressed.
What records should be kept?
Keep each report available until the next report is made or for two years, whichever is later. Reports for lifting accessories must be kept for at least two years. Records should be retrievable, linked to the correct equipment and available to the duty holder and relevant enforcing authority.
A working register can help prevent equipment from being missed. It should make it possible to identify each item, locate it, check its examination status and see what action remains open.
Common gaps we see on site
The written system may look complete while equipment on the floor tells a different story. Common gaps include colour-coded tags that have drifted from the actual examination schedule, slings with missing or illegible SWL tags, and equipment in storage that was never added to the register.
We also see examination and maintenance responsibilities concentrated in the same person, leaving independence unclear, and reports filed without the listed defects being closed out. A tag or current report is not enough if the equipment cannot be identified or a known defect remains unresolved.
When should you review the examination regime?
Review the equipment register, intervals and arrangements when new equipment is introduced, its use changes, an incident or damage occurs, or the working environment changes. Also check that reports are being received, equipment is identifiable, and defects are assigned and closed out.
For further detail on the guidance, see the HSE’s LOLER thorough examination guidance and the LOLER ACOP L113.
Safemach carries out LOLER thorough examinations on small lifting equipment and accessories, including slings, shackles, beams, trolleys, chain blocks and hoists. Where machines are used for lifting, we can also help assess the wider PUWER requirements. To discuss an examination regime for your equipment, contact Safemach and speak with a safety engineer.
