Free PUWER Checklist

The Provision and Use of Work Equipment Regulations 1998 (PUWER) place duties on employers and self-employed people who provide work equipment for use at work. A checklist can help you examine those duties against a particular machine, but it cannot replace a risk assessment or establish compliance on its own.
Safemach’s free checklist covers PUWER Regulations 4 to 24. Allow sufficient time to complete the PUWER assessment.
Download the free PUWER checklist
Why does PUWER matter?
PUWER is about the safety of work equipment throughout its use: whether it is suitable for the job, maintained and inspected where necessary, and used by people with appropriate information and training. It also covers machinery hazards such as dangerous moving parts, stopping and starting controls, isolation from energy sources, and the safety of control systems.
These duties matter because weaknesses in those areas can expose people to serious harm. For example, a guard may be missing or easy to bypass; stopping performance may no longer match the distance on which a light curtain installation relies; or machinery may retain stored energy during maintenance. A safety control system may also behave unpredictably when a fault occurs.
PUWER sits alongside, rather than replacing, the Management of Health and Safety at Work Regulations 1999 in Great Britain, and the equivalent Northern Ireland Regulations of 2000. PUWER addresses work equipment; the wider risk assessment duty applies across the work activity. Duties are enforced under health and safety law, including the Health and Safety at Work etc. Act 1974 in Great Britain and the Health and Safety at Work (Northern Ireland) Order 1978 in Northern Ireland.
A written policy has its place, but it does not show the condition of an individual machine. A useful assessment leaves a record for the equipment, with findings and actions that can be followed up.
What does the free PUWER checklist cover?
The checklist covers the general duties in Regulations 4 to 24. It ranges from suitability, maintenance, inspection, information and training to safeguarding, controls, isolation, stability, lighting, markings and warnings.
It is intended for use across the UK. In Great Britain, PUWER is the Provision and Use of Work Equipment Regulations 1998 (SI 1998/2306), enforced by the Health and Safety Executive (HSE) and local authorities. In Northern Ireland, the applicable instrument is the Provision and Use of Work Equipment Regulations (Northern Ireland) 1999 (SR 1999/305), enforced by HSENI. Regulations 4 to 24 are in substantially the same terms in both jurisdictions, so the checklist can be used in either. The parent health and safety duties differ.
The checklist deliberately does not cover Regulations 25 to 30, concerning mobile work equipment such as fork-lift trucks and drive shafts, or Regulations 32 to 35, concerning thorough examination of power presses, guards and protection devices. Those requirements still apply where relevant. Check that your assessment covers any duties outside the checklist’s scope.
How do you use a PUWER checklist?
Work through the checklist at the machine, not from memory or from a desk.
- Choose one machine or a defined group of similar equipment. Avoid trying to assess a whole site in one pass: broad answers are less useful and harder to verify.
- Answer each question yes, no or not applicable. “Not applicable” is a valid answer, but note why so a colleague or inspector can follow your reasoning.
- Take photographs of relevant evidence. Record the photo reference against the question or finding. A photograph can show whether a guard was fitted on the day and capture the surrounding context.
- Turn every “no” into an action. Record the finding, an owner and a target date. As the checklist puts it: “A checklist with no findings usually means the checklist was filled in at a desk, not at the machine.”
- Review it when circumstances change. Triggers include a new machine, process change, modification, new operator or near miss, as well as the annual review of risk assessments.
Before starting, gather the manufacturer’s instructions, declaration of conformity, maintenance and inspection records, and training records for the people who use the equipment. Many checklist questions ask for evidence, and those are useful places to look.
The assessment should be carried out by someone with the knowledge, training and experience to recognise hazards on the equipment and judge whether the measures in place are adequate. Being available to hold the clipboard is not enough. If that competence is not available in-house, involve someone who has it.
What should you do with the findings?
If a finding indicates that someone is at immediate risk, stop using the equipment, isolate it and make it safe before anything else. Do not leave an urgent safety issue waiting in an action log.
Then prioritise any “no” against Regulations 11 to 19. These cover dangerous parts, specified hazards, temperature risks, starting and stopping, emergency stops, controls, control systems and isolation from energy sources. The checklist highlights these because failures in these areas can expose people to serious injury and are likely to receive close attention during an inspection.
Other findings still need attention. Suitability, instructions and training matter, even if they do not present the same immediate risk on a particular machine. Set an owner and target date for each action, and record when it is completed.
Is a PUWER checklist the same as a risk assessment?
No. A checklist tests the equipment against general duties; it does not determine whether a particular machine is safe in the way it is used. That depends on the specific hazards, the process, the people involved and what might happen when something goes wrong.
Use checklist findings as a starting point for a suitable risk assessment under the Management of Health and Safety at Work Regulations 1999 in Great Britain or the Management of Health and Safety at Work Regulations (Northern Ireland) 2000. Consider them alongside the machinery risk assessment that should already exist.
Equally, answering yes to every question does not, by itself, make an organisation compliant. The checklist is a practical self-assessment resource, not legal advice and not a substitute for the legislation, guidance or a risk assessment.
When should you bring in a machinery safety specialist?
Some findings need engineering analysis, not simply a replacement guard or an updated tick-box record. Consider a specialist assessment if:
- Guarding depends on a stopping time that has not been measured.
- A light curtain is positioned using a distance calculated years ago.
- Safety functions rely on software that has not been validated.
- The machine has been modified since it was supplied.
- A machine is being brought in from outside the UK, or its conformity marking no longer matches the equipment.
For example, safeguarding distances may need to be checked against measured stopping performance and the applicable standard. A control system may need a documented review of its safety functions rather than an assumption that it will fail safely.
How Safemach can support PUWER assessments
Safemach carries out PUWER assessments and inspections on individual machines and across sites. Findings are reported with a prioritised action plan, so teams can understand what needs attention and why.
Where a finding needs further work, our engineers can support stop time and safety system testing, functional safety design and SISTEMA validation to EN ISO 13849-1, and the supply and installation of guards, fences and integrated safety systems. We can also help with machinery risk assessments and CE/UKCA marking support where equipment has been modified or its compliance needs review.
For teams that want to develop their own in-house capability, Safemach provides machinery safety and PUWER assessor training.

A PUWER checklist is most useful when it produces a clear, evidence-based record and actions that are followed through. If you need support interpreting a finding or assessing machinery, speak to Safemach.
